Eight (8) Open Gas Burner Top - 48" with Safety Thermocouple 169133
In compliance with ETL Certification (UL & NSF).
Configured for Natural Gas, LP Conversion Kit Included.
Eight individually controlled high efficiency 32,500 BTU (9.5 kW) Flower Flame gas burners.
Control knobs provide smooth, continuous rotation.
No gaskets and removable one-piece venturis and burners for easy cleaning.
The geometrics of the venturis and cast iron burners provides the maximum level of heating efficiency.
The cast iron burners are anti-clogging.
The 12"x12" (305mm x 305mm) cast iron pan supports allow for small pots and pans to be placed over the flame thanks to the spcial configuration.
The cast iron pan supports allow to slide pots and pans from section to section as well as to protect the pilot from spilled food and debris.
Two crumb trays covering full width of appliance below the burners capture all overflow and debris and can be easily extracted for dumping and cleaning.
All major components can be accessed from the top and front of the appliance for ease of maintenance.
Front and side panels in Stainless Steel with Scotch Brite finish.
Special heavy duty chrome plated knobs for durability and easy cleaning.
The configuration of bezels and knobs provides high level of protection against water infiltrations.
Right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Provided with kit for side-by-side connection between units for minimizing gaps and possible dirt traps.
Supplied with 4" (102mm) height adjustable, removable legs.
Unit may be installed on refrigerated base by removing the legs and inserting the special pins (optional accessory).
Unit may be installed on open cupboard by removing the legs and inserting the screws provided as standard with the open cupboards.
Included Accessories: propane converter kit, pressure regulator and main shut off valve.
4 screws to install on the cupboard base are supplied with the unit.
Gas pressure regulator is supplied with the unit.
Worktop in 304 AISI stainless steel.
- Gas Power: 260000 Btu/hr (76 kW)
- Gas Type Option: ;Propane
- Gas Inlet: 1/2"
- Front Burners Power: 9.5 - 9.5 kW (32385.5 - 32385.5 Btu/hr)
- Middle Burners Power: 9.5 - 9.5/9.5 - 9.5 kW (32385.5 - 32385.5/32385.5 - 32385.5 Btu/hr)
- External dimensions, Width: 48 1/32" (1220 mm)
- External dimensions, Height: 14 5/8" (372 mm)
- Net weight: 245 lbs (111 kg)
- Shipping width: 50 9/16" (1284 mm)
- Shipping depth: 36 3/16" (919 mm)
- Shipping height: 27 1/16" (688 mm)
- Shipping weight: 276 lbs (125 kg)
- Shipping volume: 28.67 ft³ (0.81 m³)
- *The rear and side clearances shown on the diagram indicate the minimum distances reccomeneded from the appliance to combustible surfaces.
- Range overviews
- CAD Drawings
- Data Sheet